Brochures & Downloads

Brochures & Downloads


  • Air Photoemission Spectroscopy Air Photoemission Spectroscopy

    The Photoemission in Air Systems are KP Technology’s newest addition to our large surface analysis range. The APS systems measure the absolute work function of a material by Photoemission in Air, no vacuum required. With an excitation range of 3.3eV to over 7eV.......

  • 2013-2014 Catalogue All Products

    A collection of all our products in one pdf.

  • Environmental Kelvin Probes Environmental Kelvin Probe Systems

    The Relative Humidity Kelvin Probe Systems are the ideal solution for monitoring samples in a controlled atmosphere. The RHC systems have the ability to automatically control the Relative Humidity within the chamber from 5% to 95% using the easily programmable software......

  • OLEDS Application Notes

    The effects of (NH4)2Sx treatment on the surface electronic properties of the thin indium tin oxide (ITO)‐doped ZnO films have been examined in this study. Experimental results, found that the formation of S‐metal bonds and the removal of oxygen.....

  • Solar Cells Application Notes

    Researchers have applied a micro‐tip Scanning Kelvin Probe to produce high‐resolution surface potential maps of silicon nitride (Si3N4) coated multi‐crystalline Silicon (mc‐Si) solar cells in a non‐contact, non‐invasive fashion.....

  • OFET Application Notes

    A solution processable method for employing single‐walled carbon nanotubes (SWCNTs) as bottom contact source/drain electrodes for a significant reduction of contact resistance in poly (3,3””‐didodecylquarterthiophene) based organic field effect transistors (OFETs) is proposed.....

  • Diagnosis of Disease Application Notes

    Field effect transistors (FETs) based on random networks (RNs) of single wall carbon nanotubes (CNTs) have several technological advantages. However, the low sensitivity (or no sensitivity) of RN‐CNT sensors to nonpolar molecules is a problematic, negative feature that limits their applications in the detection of a wide variety of diseases via breath samples.....

  • Photovoltaics Application Notes

    ZnO nanorod arrays on an ITO substrate and nanorod powder have been prepared via a chemical method in aqueous solution at low temperature. Two dimensions of composite nanorods in the arrays were obtained by controlling the reaction time. SEM, XRD, UV‐vis transmission, and PL measurements have been utilised to characterise the samples. The surface photovoltage (SPV).....

  • Thin Film Growth Application Notes

    Using a novel ultra high vacuum compatible Kelvin probe a study is made of the work function changes on semiconductors and metals occurring during basic surface processing, for example, surface cleaning, sputtering, oxidation and thin film growth. It shows that damage of the 7×7 reconstruction due to Ar ion bombardment has a profound influence on the work function changes....

  • Corrosion Application Notes

    Electrochemical or mechanochemical behaviour of a surface, such as corrosion or corrosive wear, is extremely complicated and involves various chemical, physical and mechanical factors. To gain a thorough insight into such a complex phenomenon, it is necessary to understand the role of each factor....

  • Nanotechnology Application Notes

    Nanocrystalline metals and alloys with grain sizes smaller than 100 nm have attracted extensive interest due to their improved mechanical, physical and chemical properties. Although electrodeposition has been one of the methods for synthesising nanocrystalline materials, properties of nanocrystalline electrodeposits are less evaluated, especially for tribological applications.....

  • Surface Photovoltage Application Notes

    A well‐aligned nanorods array of ZnO was chemically grown on conductive ITO substrate at low temperature. The photogenerated charges at surface and interface were examined by surface photovoltage techniques based on both Kelvin probe and lock‐in amplifier with dc bias....

  • Organic Devices Application Notes

    A simple chemical strategy is described to produce branched alkyl chains on Si(111) from the reaction of an ester‐terminated silicon surface. The stability of the silicon surfaces with linear and branched monolayers is characterised by electrochemical impedance, Kelvin probe, and high‐resolution electron energy loss spectroscopy......

  • Scanning Kelvin Probes Scanning Kelvin Probe Systems

    Our large range of Scanning Kelvin Probes gives the user full access to 2D and 3D Work Function plots of samples ranging in size from 5mm to 300mm. With Work Function resolution at less than 3meV, and the resolution of the 3-axis scanning stages as low as 317.5nm....

  • Surface Photovoltage Modules SPV, SPS Modules

    he surface Photovoltage Spectroscopy modules are the perfect all-in-one solution for in-depth studies of light sensitive materials such as Organic Semiconductors, Solar Cells or Light Sensitive Dyes.....

  • UHV Kelvin Probes Ultra High Vacuum Kelvin Probes

    Our range of Ultra High Vacuum Kelvin Probes gives the user full access to Work Function measurements under vacuum. Each UHV Kelvin Probe comes with a High Quality Manual or Motorised Translator that enables reliable and accurate tip-to-sample positioning.....